ProMach is your partner from start to finish. Our product brands are grouped into distinct business lines that make the most sense to our customers, covering every function of the packaging line: Filling & Capping, Flexibles, Product Handling, Labeling & Coding, End of Line, and Pharma.
learn more
BT-ST
Request More Information ›This model is mainly used on semi-automatic line to screw and tighten closures previously placed on the containers.The beltorque®, model BT-ST, is an inline cap screwer-tightener mounted with three (3) sets of belts. The container gripper belts stabilize the containers for the cap screwing and tightening operations. The screwing belts screw the caps. The tightening belts apply the requested final torque to the caps. This equipment may be supplied with several options.
- Packaging line speed up to 300 cpm
- Standard cap diameter up to 4.75″ (120mm)
- Container diameter from 0.5″ to 7″ (12mm to 175mm)
- Container height from 2″ to 12″ (50mm to 305mm)
Equipment
- Indexing systems:Depending on packaging line speed and bottle material beltorque® will be delivered with either a standard double spacing wheel, customized star wheel or customized feed screw system.
- Inspection systems:An inspection station verifies the presence of the cap on the container, the presence of the foil, the skewed caps and the lay-down bottles.
- Reject systems:Depending on packaging line speed and bottle material beltorque® will be delivered with either a standard reject table or a high-speed line deviator.
Additional Products
beltorque® Inline Automated Capper – BT-IC This model is fully automated. It places the cap on the container, screws the cap and applies a controlled torque on it, which can be monitored for further quality assurance. The beltorque® capper is equipped with three (3) sets of belts. The container gripper belts stabilize the containers during the capping operation process. The screwing belts place and screw the closure on the container. The tightening belts apply the final required torque to the caps.
beltorque® Inline Automated Capper – BT-IC This model is fully automated. It places the cap on the container, screws the cap and applies a controlled torque on it, which can be monitored for further quality assurance. The beltorque® capper is equipped with three (3) sets of belts. The container gripper belts stabilize the containers during the capping operation process. The screwing belts place and screw the closure on the container. The tightening belts apply the final required torque to the caps.
beltorque® Inline Retorquer – BT-RT This unit is usually placed after a cap induction sealing machine or to apply a controlled torque on closures previously screwed. The beltorque®, model BT-RT, is an inline cap tightener that uses two (2) sets of belts. The container gripper belts stabilize the containers for the cap tightening operations. The tightening belts apply the final torque to the caps. This equipment may be supplied with several options.
Fully automated capper is usually used for the pharmaceutical industry. This equipment follows strict requirements for design and assembly to ensure industry standard compliance.
Beauty and Health Care industry often requires flexible design and our BT-ST model is suitable for such requirements. Our processing and design capabilities allow us to provide solutions adapted to the wide variety of fragility, shapes and sizes of containers.
beltorque® inline screwer-tightener is also used for the Personal care industry and for powder lines. The capability of the equipment to cap various sizes and shapes is suitable for those industries. Our equipment can be designed with wash down or explosion proof options. beltorque® design and conception is compliant with hazard analysis and critical control points.
