Skip to main content

A capper for your personal care industry and powder line market

beltorque® inline screwer-tightener is also used for the Personal care industry or for powder lines markets. The capability of the equipment to cap various types in size and shape is suitable for those industries. Our equipment can be design with wash down or explosion proof options. beltorque® design and conception is compliant with hazard analysis and critical control points.

Bouteille Other fond blanc03
202011 Seasonings and Spices containers and caps
202105 Nutraceutical containers and caps 1

Additional Products

BT-IC

beltorque® Inline Automated Capper – BT-IC This model is fully automated. It places the cap on the container, screws the cap and applies a controlled torque on it, which can be monitored for further quality assurance. The beltorque® capper is equipped with three (3) sets of belts. The container gripper belts stabilize the containers during the capping operation process. The screwing belts place and screw the closure on the container. The tightening belts apply the final required torque to the caps.

BT-ICL

beltorque® Inline Automated Capper – BT-IC This model is fully automated. It places the cap on the container, screws the cap and applies a controlled torque on it, which can be monitored for further quality assurance. The beltorque® capper is equipped with three (3) sets of belts. The container gripper belts stabilize the containers during the capping operation process. The screwing belts place and screw the closure on the container. The tightening belts apply the final required torque to the caps.

BT-RT

beltorque® Inline Retorquer – BT-RT This unit is usually placed after a cap induction sealing machine or to apply a controlled torque on closures previously screwed. The beltorque®, model BT-RT, is an inline cap tightener that uses two (2) sets of belts. The container gripper belts stabilize the containers for the cap tightening operations. The tightening belts apply the final torque to the caps. This equipment may be supplied with several options.

BT-ST

beltorque® Inline Screwer-Tightener – BT-ST This model is mainly used on semi-automatic lines to screw and tighten closures previously placed on the containers. The beltorque®, model BT-ST, is an inline cap screwer-tightener mounted with three (3) sets of belts. The container gripper belts stabilize the containers for the cap screwing and tightening operations. The screwing belts screw the caps. The tightening belts apply the requested final torque to the caps. This equipment may be supplied with several options.

A capper for your pharmaceutical industry

Fully automated capper is usually used for the pharmaceutical industry. This equipment follows strict requirements for design and assembly to ensure industry standard compliance.

A capper for your beauty and health care industry

The Beauty and Health Care industry often requires flexible design and our BT-ST model is suitable for such requirements. Our processing and design capabilities allow us to provide solutions adapted to the wide variety of fragility, shapes and sizes of containers.